kaiju no 11 helmet mask
z
ID: 27103
$20.00
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 143.04 MB
-
Upload date: 10/02/2025
-
Last update: 10/02/2025
Description
kaiju no 11
Special Patreon subscription model. Plus two more models from this month.
https://www.patreon.com/c/ZAIDER3D
The helmet measures
417 mm wide
906 mm long and
497 mm high.
Without a support, 3 kg of plastic is consumed. It can be printed without a support, but more cuts are required. It's now possible to print slightly more material, up to 30% more, depending on the print settings and position.
With a standard configuration, it takes 13 days of printing, but this can be reduced to 5 days of printing by adjusting the nozzle height and print speed.
It is for a head with a circumference of 56 cm but it does not vary much since a large part of the interior is egg.
Special Patreon subscription model. Plus two more models from this month.
https://www.patreon.com/c/ZAIDER3D
The helmet measures
417 mm wide
906 mm long and
497 mm high.
Without a support, 3 kg of plastic is consumed. It can be printed without a support, but more cuts are required. It's now possible to print slightly more material, up to 30% more, depending on the print settings and position.
With a standard configuration, it takes 13 days of printing, but this can be reduced to 5 days of printing by adjusting the nozzle height and print speed.
It is for a head with a circumference of 56 cm but it does not vary much since a large part of the interior is egg.
Tags
Report this design
