Beer crates complete set battery boxes stackable

The big economy set

Simple filament and resin printing without supports.

Here as a set 5 different functional battery boxes for storing batteries and more in the form of beer crates with labels of battery sizes, as well as an unlabeled empty box.

These beer crates can hold various batteries of type AA AA cells, AAA micro cells, 9V block battery rail, baby cells and button cells (empty box). Clear labeling on both sides (except empty box).

These beer crates are stackable in different directions and individually always consist of 2 files, the beer crate as one model and an optional sub-part element, which is only required for the desire of stackability. This is glued invisibly under the beer crate if required. The highlight is that the bottom part can also be used fully compatible as a removable lid.

I had always kept my various batteries in cardboard boxes with labels, but old and new batteries kept getting misplaced in the boxes. With these pretty beer boxes is now an end to it. Order with design and by the way have fun printing. :)

Also ideal to print as an imaginative gift.

Have fun printing, organizing and gifting!

Included print files

1 x Beer box type AAA micro cells

1 x Beer crate type AA AA cells

1 x Beer crate type 9V block batteries

1 x Beer crate type 9V block batteries and baby cells

1 x Beer crate type empty crate without labeling.

1 x optional stackable bottom part with lid option.

**Dimensions

Beer crate (L 88.4mm x W 56.4mm x H 56mm)

Bottom part (L 88.0mm x W 56.0mm x H 3.4mm)
3D printing settings

Printing method filament or resin printing.

Filament printing with max. 0.4mm nozzle, max. 0.2mm height.

Material tested : PLA, various colors and manufacturers.

Supports not required despite some overhangs, do not set temperatures too hot (liquid). Super adhesion given by large surface area.

Filling can be from 25% to 100%, both tested.

Resin printing

Unproblematic resin printing without supports, use of magnetic plate for easy release optionally recommended.

Standard resin, 0.05mm to also 0.1mm print height were successful. When using the stacking function, if necessary, slightly adjust the shrinkage, since the bottom part may be exposed longer by first layers with you and this could cause slightly different dimensions.

**Assembly

Easy optional mounting of the bottom part for stacking function possible by means of various suitable adhesives