Decorative house with chimney for flowers 24 stl models

24 different models of houses to choose from.

Beautiful decorative houses with chimneys in which (dry) flowers and grasses for decoration.

24 models, for example, with different chimney (round, square, recessed), house shapes (long, short, pointed), roof shapes (round roof, pointed roof), with windows and doors and also without windows and doors.

Printing without support structures.

Super adhesion to print bed due to 5mm inner print frame.

Internal hollow, wall thickness about 1.6mm, can be illuminated.

Models can be scaled without any problem.

In the original dimensions, the inner diameter of the chimneys as a vase function is about 12-13mm.

Dimensions houses 1:1 about 60mm x 60mm x 60mm (120mm) or different heights for pointed roof or round roof.

By using bright filament colors, the houses can be illuminated from the inside.

All colors and filaments can be used according to your own ideas, for example, even filament in wood look (very nice).

Houses can also be used for extraordinary tokens in well-known board games as houses or hotels due to strong scaling.

Have fun printing and decorating.
3D printing settings

No support structures required. Filling 25% was applied in PLA filament printing on Anycubic Kobra as well as I3 Mega.

Integrated printing plate adhesion for optimal hold on the print bed. Economical printing due to internal cavity (wall thickness approx. 1.6mm).

0.4mm nozzle at 0.2mm layer height was used.