Hellboy Model Printing Miniature Assembly File STL for Printing 1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS

c
cody3d
ID: 7528
$2.60

3D Model Details

  • Texture: No
  • Multipart model: No
  • File format: zip
  • File size: 3.93 MB
  • Upload date: 10/28/2019
  • Last update: 10/28/2019
Description
YOUTUBE Video: https://www.youtube.com/watch?v=oMFX8EP__jQ&t=59s
follow me
FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks
ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/
TWITTER: https://twitter.com/Cody3D
ARTSTATION: https://www.artstation.com/cody3d
ellboy 3D Model 

figurine, Miniature Assembly Figure

more than 200 hours of modeling

two versions, long and short horns

however, the dimensions can be changed with each slicer

 

in total HellBoy and composed of 4,178 mil points

all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

 

1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS

 

 

dimensions approximately  FDM-FFF     Z 31Cm  X 12.5Cm   Y 15Cm

                                      Z 11.8inch  X 4.9inch  Y 5.9inch

 

dimensions approximately  DLP-SLA-SLS     Z 13Cm  X 6.9Cm   Y 7.1Cm

                                          Z 5.1inch   X 2.7inch   Y 2.8inch

 

all files are already in place for optimal printing 

 

HellBoy 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale, 

every part of the model in the most convenient way for you.

Each file has been checked and repaired with Netfabb

The parts of the model are already positioned for 3D printing

Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...

All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts, 

it is recommended to print with a 4-5 skirt

 

Quality

Layer height: 0.1mm*

Initial layer thickness: 0.3mm

Bottom/top pattern: lines

Skin perimeter line count: 0

Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).

*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

 

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of 

the model’s parts.

 

Speed setups:

Infill speed: 30mm/s

Outer shell speed : 30mm/s

Inner shell speed: 20mm/s

Top/bottom speed: 20mm/s

Support speed: 50mm/s

Travel speed: 150mm/s

Skirt speed: 30mm/s

Amount of slower layers: 4

Infill:

 

Infill pattern: Grid

Line distance: 1.5mm

Infill overlap: 20%

Infill layers: 0

Support:

 

Enable support: Check

Placement: Everywhere

Overhang angle: 30°

X/Y distance: 0.7mm

Top distance: 0.2mm

Bottom distance: 0.2mm

Stair step height: 0.5mm

Join distance: 0.7mm

Area smoothing: 0.6mm

Use towers: check

Pattern: Grid

Line distance: 1.5mm
Tags
Report this design

More models from cody3d

More from category Toys & Hobby