3D Fillament Support / Adapter
ID: 2417
$1.00
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 31.63 KB
-
Upload date: 02/18/2015
-
Last update: 02/18/2015
Description
3D Filament Support / Adapter
This is used to attach the roll of filament to your support. It will make the roll spinning thanks to the 608RS bearings.
To be a complete set u will need to print 2 pcs of the stl file attached (it takes ~3h for one pcs).
After you printed it add the following hardware:
> 2 pcs 608RS bearing
> 4 pcs M3*8 Screw
> 4 pcs M3 nut
> 1 pcs 8mm threaded rod - 130mm length
> 6 pcs M8 nut
> 6 pcs M8 washers
This is used to attach the roll of filament to your support. It will make the roll spinning thanks to the 608RS bearings.
To be a complete set u will need to print 2 pcs of the stl file attached (it takes ~3h for one pcs).
After you printed it add the following hardware:
> 2 pcs 608RS bearing
> 4 pcs M3*8 Screw
> 4 pcs M3 nut
> 1 pcs 8mm threaded rod - 130mm length
> 6 pcs M8 nut
> 6 pcs M8 washers
Report this design
