The Steam Rocket

ID: 5209
$1.00

3D Model Details

  • Texture: No
  • Multipart model: Yes
  • File format: stl
  • File size: 2.5 MB
  • Upload date: 08/24/2016
  • Last update: 08/24/2016

Description

The Steam Rocket goes to Mars!
Steampunk inspired rocket. Detailed and very easy to print. You don't need rafts or supports.
The Steam Rocket goes to Mars!

Steampunk inspired rocket. Detailed and very easy to print. You don't need rafts or supports.

It is divided in 5 parts to easily change printer settings, as some parts are more detailed than others. Special attention to 5_antenna, that have a very hard angle and it requires a slower print with at least 0,1mm to 0,12mm layer height.

Very easy to assemble, just follow the numbers from 1 (bottom) to 5 (top), with some glue.

I recommend:

0,25 noozle (so you can print and see all the details)

0,75mm to 1mm wall

0,1 to 0,15 layer height

10mm/s to 30mm/s print speed

For all parts except “5_antenna.stl” that needs a slower print (about 3mm/s to 5mm/s), maybe in some printers it can be useful a raft to hold the print in place.

I hope you have fun with it.

Tags

Report this design

More models from pikitote

More from category Art

Cherub Sculpture zbrushingmx

$29.00

funny little men openair

$0.00

Hector Salamanca openair

$0.00

hugs openair

$0.00

Nicolaus Copernicus openair

$0.00

Yiga Clan Mask openair

$0.00

crown openair

$0.00

Greek maiden statue openair

$0.00