Steampunk Eagle Wall Hook (High Detail)

Decorative steampunk eagle wall hook — highly detailed bird-of-prey head with mechanical goggle, riveted straps and curved hook. Designed for 3D printing and finishing with metallic paint or real metal look. Ideal for hallways, bathrooms, or themed interiors.

Features

One watertight, manifold mesh (single connected object)

High level of sculpted feather and mechanical detail (rivets, flexible tubing, monocle)

Designed as a functional wall hook — mounting plate integrated into the backplate (holes are shown in renders; add/adjust mounting holes in slicer if required)

No embedded color or textures (STL). Use PBR materials or paint for metallic finishes.

Example technical metadata (PLEASE replace example numbers with your export values)

Format: Binary STL

Units: millimeters

Bounding box (W × D × H): 150 × 120 × 260 mm (example — scale to your needs)

Triangle count: ~95,000 triangles (high detail)

File size: ~18–35 MB (binary, depending on export/decimation)

Watertight: Yes

Manifold: Yes

3D printing recommendations
Best printer

Resin (SLA/DLP/LCD) — recommended to preserve intricate feather and rivet detail.

Layer height: 25–50 µm

Supports: tree supports on recessed/backside areas; minimal touch points on detailed surfaces

If large, hollow with 2–3 mm shell and add 3–5 mm drain holes (place on underside/backplate)

FDM (FFF) — possible; expect loss of micro detail. Use for stylized/rough prints.

Nozzle: 0.25–0.4 mm (smaller nozzle preserves detail)

Layer height: 0.10–0.15 mm

Shells/perimeters: 3

Infill: 15–25% (higher for heavy loads)

Use brim/raft for adhesion.