aero toothbrush case
ID: 19322
$1.40
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 818.64 KB
-
Upload date: 09/14/2023
-
Last update: 09/14/2023
Description
a practical print-in-place tootbrush holder, requires no supports
design that allows an easy cleaning.
with display system to easily access the brush.
it has a hole to attach a strap.
includes a second box file with a clean interior in case you need the box to give it a different use, for example as a pencil holder.
requires about 60 grams of material or 50 grams if you only print the box.
3D printing settings
the design has a pattern of 2mm line width at the base, so it is advisable to print a first layer slowly with a minimal edge, or raise the temperature of the print bed.
design that allows an easy cleaning.
with display system to easily access the brush.
it has a hole to attach a strap.
includes a second box file with a clean interior in case you need the box to give it a different use, for example as a pencil holder.
requires about 60 grams of material or 50 grams if you only print the box.
3D printing settings
the design has a pattern of 2mm line width at the base, so it is advisable to print a first layer slowly with a minimal edge, or raise the temperature of the print bed.
Report this design
