Upright Helping Handle
ID: 1651
$1.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 528.1 KB
-
Upload date: 10/24/2014
-
Last update: 10/24/2014
Description
If you don't have a self-propelled upright vacuum then this will assist you to push and pull your upright using both hands.
Please print at least 30% infill. You will need: four small wood screws, five screws/nuts that will fit in 5 mm holes, and two lengths of 1/2 inch dowel cut to suit your desired handle length. The attaching clamp part has been designed to allow for some adjustment to the width of the upright's original handle.
Please print at least 30% infill. You will need: four small wood screws, five screws/nuts that will fit in 5 mm holes, and two lengths of 1/2 inch dowel cut to suit your desired handle length. The attaching clamp part has been designed to allow for some adjustment to the width of the upright's original handle.
Report this design
