Desk phone holder, special for video calls and video conference, handsfree use, with a characteristic Italian style.
It is a universal support for almost all types of mobile phone, thanks to the possibility of widening or narrowing the two upper arms according to the width of the phone to be installed, which once stuck do not slide and can be repositioned only with a certain force .
In the photos you can see an Iphone SE with and without the silicone shell.
The holes for the passage of the power cable and the auxiliary audio are arranged at the bottom, there are also 2 windows for the phone speakers
The support is made with 5 interlocking pieces. all printable without any print support and without glue.
Print with 0.2 mm layer , the model shown was made with a free software named Prusaslicer 2.2.0 .
Be careful to provide a raft base layer.
Remember to clean the print bed regularly especially if you see that the filament does not stick.
Good 3D printing at all !
Post Scriptum : if after some time of use the joints of the upper arms are loosened, it will always be possible fix them with cyanoacrylate in the width of your favorite phone.