Front engine old school dragster with shell V13 Scale 1:25
ID: 30884
$30.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 49.53 MB
-
Upload date: 08/05/2026
-
Last update: 08/05/2026
Description
Model dimensions:
- length - 193 mm
- width - 58.6 mm
- height - 52.5 mm
- length of the longest part - 158.6 mm
The model consists of parts: Air intake, Carb stacks, Engine head cover, Engine main part, Exhaust, Frame, Front left rim, Front right rim, Front tires, Fuel tank, Parachute bag, Push bar, Rear rims, Rear tires, Seat, Shell, Shifter, Steering wheel, Windshield.
The detail “Windshield” should be printed in clear resin.
The “Carb stacks” should be mounted after the “Shell”.
The “Steering wheel” should be mounted with metal pin with diameter 1 mm and length 9 mm.
During assembling use metal pins with diameter 1 mm.
- length - 193 mm
- width - 58.6 mm
- height - 52.5 mm
- length of the longest part - 158.6 mm
The model consists of parts: Air intake, Carb stacks, Engine head cover, Engine main part, Exhaust, Frame, Front left rim, Front right rim, Front tires, Fuel tank, Parachute bag, Push bar, Rear rims, Rear tires, Seat, Shell, Shifter, Steering wheel, Windshield.
The detail “Windshield” should be printed in clear resin.
The “Carb stacks” should be mounted after the “Shell”.
The “Steering wheel” should be mounted with metal pin with diameter 1 mm and length 9 mm.
During assembling use metal pins with diameter 1 mm.
Tags
Report this design
