Adorable wolf / husky / dog figurine holding a heart pendant
ID: 28041
$3.54
3D Model Details
-
Texture: Yes
-
Multipart model: No
-
File format: stl
-
File size: 34.55 MB
-
Upload date: 01/25/2026
-
Last update: 01/25/2026
Description
3D model description
This downloadable STL features an adorable wolf / husky / dog figurine holding a heart, sculpted with detailed fur, expressive facial structure, paw pads, and an ornamental display base. All original sculpted textures are preserved at high resolution, and the mesh is watertight—ready for both FDM and resin (SLA/DLP) 3D printing.
Perfect as a gift, collectible, pendant charm, keychain, or desk decoration for animal lovers.
3D printing settings
🖨 FDM (PLA / PETG) Settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for maximum detail)
Walls/Perimeters: 3–4
Infill: 10–20% (pendant) / 20–35% (figurine)
Supports: required under chin, ears, paws, heart underside, and loop
Orientation: upright or slightly tilted for minimal visible supports
Speed: 40–60 mm/s
🧪 Resin (SLA / DLP) Settings
Layer height: 0.025–0.05 mm
Angle: 10–20° tilt for smooth wrinkle/fur reproduction
Supports: light/medium supports on ears, paws, loop, heart underside
Wash + cure according to resin guidelines
Resin printing captures the fine fur texture especially well.
This downloadable STL features an adorable wolf / husky / dog figurine holding a heart, sculpted with detailed fur, expressive facial structure, paw pads, and an ornamental display base. All original sculpted textures are preserved at high resolution, and the mesh is watertight—ready for both FDM and resin (SLA/DLP) 3D printing.
Perfect as a gift, collectible, pendant charm, keychain, or desk decoration for animal lovers.
3D printing settings
🖨 FDM (PLA / PETG) Settings
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for maximum detail)
Walls/Perimeters: 3–4
Infill: 10–20% (pendant) / 20–35% (figurine)
Supports: required under chin, ears, paws, heart underside, and loop
Orientation: upright or slightly tilted for minimal visible supports
Speed: 40–60 mm/s
🧪 Resin (SLA / DLP) Settings
Layer height: 0.025–0.05 mm
Angle: 10–20° tilt for smooth wrinkle/fur reproduction
Supports: light/medium supports on ears, paws, loop, heart underside
Wash + cure according to resin guidelines
Resin printing captures the fine fur texture especially well.
Tags
- 3d print stl
- Printable STL
- ornament stl
- love stl
- valentine stl
- kawaii animal stl
- digital stl file
- animal charm stl
- animal figurine stl
- heart pendant stl
- wolf stl file
- cute wolf stl
Report this design
