Adorable Persian cat figurine holding a heart Pendant
ID: 28039
$3.54
3D Model Details
-
Texture: Yes
-
Multipart model: No
-
File format: stl
-
File size: 35.39 MB
-
Upload date: 01/25/2026
-
Last update: 01/25/2026
Description
3D model description
This downloadable STL features an adorable cat figurine holding a heart, designed with highly detailed fur, expressive face features, paw pads, whiskers, and an ornamental display base. All sculpted details are preserved in high resolution, and the model is fully watertight—ideal for both FDM and resin (SLA/DLP) 3D printing.
Perfect as a gift, collectible figure, pendant charm, keychain, or desk decoration, especially for cat lovers.
3D printing settings
🖨 FDM Printing Recommendations (PLA/PETG)
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for finest detail)
Perimeters: 3–4
Infill: 10–20% (pendant) / 20–35% (figurine)
Supports: required under chin, paws, belly curve, ears, and loop
Orientation: upright or slightly tilted to reduce visible support marks
Speed: 40–60 mm/s
🧪 Resin (SLA/DLP) Recommendations
Layer height: 0.025–0.05 mm
Angle: 10–20° tilt for best results
Supports: light/medium supports on paws, ears, heart underside, and loop
Wash + cure according to resin type
Resin printing reproduces fine fur details exceptionally well.
This downloadable STL features an adorable cat figurine holding a heart, designed with highly detailed fur, expressive face features, paw pads, whiskers, and an ornamental display base. All sculpted details are preserved in high resolution, and the model is fully watertight—ideal for both FDM and resin (SLA/DLP) 3D printing.
Perfect as a gift, collectible figure, pendant charm, keychain, or desk decoration, especially for cat lovers.
3D printing settings
🖨 FDM Printing Recommendations (PLA/PETG)
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm for finest detail)
Perimeters: 3–4
Infill: 10–20% (pendant) / 20–35% (figurine)
Supports: required under chin, paws, belly curve, ears, and loop
Orientation: upright or slightly tilted to reduce visible support marks
Speed: 40–60 mm/s
🧪 Resin (SLA/DLP) Recommendations
Layer height: 0.025–0.05 mm
Angle: 10–20° tilt for best results
Supports: light/medium supports on paws, ears, heart underside, and loop
Wash + cure according to resin type
Resin printing reproduces fine fur details exceptionally well.
Tags
- 3d print stl
- Printable STL
- cute cat stl
- ornament stl
- love stl
- valentine stl
- kawaii animal stl
- digital stl file
- animal charm stl
- animal figurine stl
- heart pendant stl
- cat stl file
Report this design
