Colorful Parrot Pendant Holding a Heart – Cute Bird Pendant
ID: 28025
$3.54
3D Model Details
-
Texture: Yes
-
Multipart model: No
-
File format: stl
-
File size: 32.34 MB
-
Upload date: 01/23/2026
-
Last update: 01/23/2026
Description
3D model description
Bring color, charm, and personality to your 3D prints with this adorable parrot holding a heart!
This sculpt features detailed layered feathers, a curved beak, expressive eyes, and a decorative round base. The parrot gently holds a heart between its wings, making it ideal as a gift, keychain, pendant, Valentine’s item, or collectible display piece.
The model is fully sculpted, manifold, and print-ready. The loop on top allows attachment to a necklace, cord, key ring, zipper pull, or bag charm.
3D printing settings
FDM Printing
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm
Walls/perimeters: 2–3
Infill: 15–25%
Orientation: upright on the base
Supports: only needed for the loop and small overhangs
Bed adhesion: small brim recommended for miniature sizes
Resin Printing (SLA/DLP)
Layer height: 0.025–0.05 mm
Orientation: 20–30° tilt, supports on the back and bottom
Use small/light touchpoints to protect feather detail
If scaled above ~80–100 mm, hollow with drainage holes
Bring color, charm, and personality to your 3D prints with this adorable parrot holding a heart!
This sculpt features detailed layered feathers, a curved beak, expressive eyes, and a decorative round base. The parrot gently holds a heart between its wings, making it ideal as a gift, keychain, pendant, Valentine’s item, or collectible display piece.
The model is fully sculpted, manifold, and print-ready. The loop on top allows attachment to a necklace, cord, key ring, zipper pull, or bag charm.
3D printing settings
FDM Printing
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm
Walls/perimeters: 2–3
Infill: 15–25%
Orientation: upright on the base
Supports: only needed for the loop and small overhangs
Bed adhesion: small brim recommended for miniature sizes
Resin Printing (SLA/DLP)
Layer height: 0.025–0.05 mm
Orientation: 20–30° tilt, supports on the back and bottom
Use small/light touchpoints to protect feather detail
If scaled above ~80–100 mm, hollow with drainage holes
Tags
- 3d print stl
- Printable STL
- ornament stl
- animal pendant stl
- valentine stl
- heart figurine stl
- charm stl file
- kawaii animal stl
- digital stl file
- parrot stl file
- bird figurine stl
- cute bird stl
Report this design
