Cute Cute Pig Ornament - Pendant with heart
ID: 28024
$3.54
3D Model Details
-
Texture: Yes
-
Multipart model: No
-
File format: stl
-
File size: 20.83 MB
-
Upload date: 01/23/2026
-
Last update: 03/15/2026
Description
3D model description
This download contains a high-detail single-piece STL model of a cute pig figurine holding a heart. The sculpt features finely detailed fur/texture, expressive eyes, a decorative base, and an integrated hanging loop so the print can be used as an ornament or charm. The model is supplied in a high-resolution and a print-optimized variant.
3D printing settings
FDM (PLA / PETG)
Nozzle: 0.4 mm
Layer height: 0.12–0.24 mm (0.12 mm recommended for best detail)
Infill: 10–25%
Perimeters: 2–3
Orientation: upright with base on the bed (base is flat)
Supports: minimal supports recommended under the hanging loop, slight undercuts of the ears, and the heart area depending on your slicer. Tree supports work well.
Bed adhesion: brim or glue stick if needed
Resin (SLA / DLP)
Layer height: 0.025–0.05 mm
Orientation: tilt 10–20° to reduce visible support marks; place supports on the back of the model and loop.
Supports: standard resin supports for overhangs and loop.
Post-cure: as recommended by resin manufacturer
This download contains a high-detail single-piece STL model of a cute pig figurine holding a heart. The sculpt features finely detailed fur/texture, expressive eyes, a decorative base, and an integrated hanging loop so the print can be used as an ornament or charm. The model is supplied in a high-resolution and a print-optimized variant.
3D printing settings
FDM (PLA / PETG)
Nozzle: 0.4 mm
Layer height: 0.12–0.24 mm (0.12 mm recommended for best detail)
Infill: 10–25%
Perimeters: 2–3
Orientation: upright with base on the bed (base is flat)
Supports: minimal supports recommended under the hanging loop, slight undercuts of the ears, and the heart area depending on your slicer. Tree supports work well.
Bed adhesion: brim or glue stick if needed
Resin (SLA / DLP)
Layer height: 0.025–0.05 mm
Orientation: tilt 10–20° to reduce visible support marks; place supports on the back of the model and loop.
Supports: standard resin supports for overhangs and loop.
Post-cure: as recommended by resin manufacturer
Tags
- 3d print stl
- Printable STL
- ornament stl
- pig stl file
- cute pig stl
- pig figurine stl
- animal pendant stl
- valentine stl
- heart figurine stl
- charm stl file
- kawaii animal stl
- digital stl file
Report this design
