Cute Horse Ornament - STL File - Horse Pendant for 3D print
ID: 27999
$3.54
3D Model Details
-
Texture: Yes
-
Multipart model: No
-
File format: stl
-
File size: 18.16 MB
-
Upload date: 01/20/2026
-
Last update: 03/15/2026
Description
3D model description
This download contains a highly detailed, single-piece STL model of a cute horse figurine holding a heart. The sculpt features detailed fur and mane, smooth stylized anatomy, a decorative round base, and an integrated hanging loop so the model can be used as an ornament or charm. Supplied in both high-resolution and print-friendly versions.
3D printing settings
FDM (PLA / PETG / ABS)
Nozzle: 0.4 mm
Layer height: 0.12–0.24 mm (0.12 for fine detail)
Infill: 10–25%
Walls: 2–3 perimeters
Orientation: upright (base on the bed)
Supports: minimal — mainly under:
hanging loop
slight undercuts in mane
heart underside
Tree supports recommended
Bed adhesion: smooth PEI, glue stick, or brim
Resin (SLA / DLP)
Layer height: 0.025–0.05 mm
Orientation: tilt 10–20°
Supports: medium supports on back of the figure + loop
Post-cure as recommended for resin type
This download contains a highly detailed, single-piece STL model of a cute horse figurine holding a heart. The sculpt features detailed fur and mane, smooth stylized anatomy, a decorative round base, and an integrated hanging loop so the model can be used as an ornament or charm. Supplied in both high-resolution and print-friendly versions.
3D printing settings
FDM (PLA / PETG / ABS)
Nozzle: 0.4 mm
Layer height: 0.12–0.24 mm (0.12 for fine detail)
Infill: 10–25%
Walls: 2–3 perimeters
Orientation: upright (base on the bed)
Supports: minimal — mainly under:
hanging loop
slight undercuts in mane
heart underside
Tree supports recommended
Bed adhesion: smooth PEI, glue stick, or brim
Resin (SLA / DLP)
Layer height: 0.025–0.05 mm
Orientation: tilt 10–20°
Supports: medium supports on back of the figure + loop
Post-cure as recommended for resin type
Tags
Report this design
