Cute Rhino Figurine With Heart — Pendant / Ornament
ID: 27960
$3.54
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 46.16 MB
-
Upload date: 01/15/2026
-
Last update: 01/15/2026
Description
3D model description
This lovingly detailed rhino figurine features stylized carved textures, a big expressive horn, and a heart held between its paws. A loop is integrated at the top so it can be used as a pendant, ornament, keychain charm, bag accessory, or mini display statue.
Designed for easy printing on both FDM and resin printers, with clean geometry and well-supported details.
3D printing settings
FDM Printing Recommendations
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm recommended for texture detail)
Walls: 2–3
Top/Bottom: 6–8 layers
Infill: 10–20% (Gyroid ideal)
Supports:
Recommended under the chin/trunk area, underside of hands holding the heart, and parts of the horn
Orientation: Print upright on the circular base
Bed adhesion: Brim strongly recommended for small prints
Filament: PLA works beautifully; PETG also good
This lovingly detailed rhino figurine features stylized carved textures, a big expressive horn, and a heart held between its paws. A loop is integrated at the top so it can be used as a pendant, ornament, keychain charm, bag accessory, or mini display statue.
Designed for easy printing on both FDM and resin printers, with clean geometry and well-supported details.
3D printing settings
FDM Printing Recommendations
Nozzle: 0.4 mm
Layer height: 0.12–0.20 mm (0.12 mm recommended for texture detail)
Walls: 2–3
Top/Bottom: 6–8 layers
Infill: 10–20% (Gyroid ideal)
Supports:
Recommended under the chin/trunk area, underside of hands holding the heart, and parts of the horn
Orientation: Print upright on the circular base
Bed adhesion: Brim strongly recommended for small prints
Filament: PLA works beautifully; PETG also good
Report this design
