Ornate Lion Statue (High Detail)

High-detail 3D sculpture of a walking lion with ornate raised swirl patterns, a decorative wheel/chakra motif on the flank and a flowing mane. The mesh is prepared as a single watertight, manifold object suitable for printing and post-processing into a metallic finish (gold/bronze with optional green patina).

Features

Fully enclosed / watertight geometry

Manifold: no non-manifold edges or loose triangles

Single connected component (one piece)

Fine raised ornamentation across body, mane and legs

Smooth tusk/face/leg topology for good surface finish

Example technical metadata (replace with your values)

Format: Binary STL

Units: mm

Bounding box (W × D × H): 220 × 80 × 140 mm (example — change to match your export)

Triangle count: ~110,000 triangles (high-detail)

File size: ~28 MB (binary)

Watertight: Yes

Manifold: Yes

Export / preparation notes

Export as Binary STL for smaller file size.

Apply transforms (scale to mm) and apply all modifiers before export.

Keep sufficient triangle density to preserve ornament relief; if file is too large, decimate carefully (target ≥ 50k triangles) while preserving curvature.

Print recommendations
Best printer type

Resin (SLA/DLP/LCD) — recommended for highest fidelity and crisp ornament details.

Layer height: 25–50 µm.

Use minimal support touchpoints (tree supports) to avoid scarring ornate surfaces.

FDM (FFF) — possible, but expect loss of very fine details.

Nozzle: 0.25–0.4 mm, layer height 0.10–0.15 mm.

Use a brim/raft and careful support placement.