RC CAR JLB CHEETAH DIY EDITION SYMBOLIC

BUILD GUIDE :
https://docs.google.com/presentation/d/1jabhHdwHruR_a4ibou3fMm3Z3C0JivmusydT-Vo3oH4/edit?usp=sharing

NEEDS :

- TPU ( 500g )
Arms
Bumpers

- PLA Plus ( 1Kg )
All the Rest

- TOOLS
Hallen H2.5mm(for M3 Screws) / H1.5(for Pinion)
Long Nose Pliers
ThreadLocker
Grease
Clamp Gaskets

- HARDWARE STORE
Rolling 6800ZZ ( X 8)
Washers M3 ( X 100)
Lock Nuts M3 ( X 100)
Screws
M3 x 5mm Hexa ( X 8) (MotorMount)
M3 x 10mm Hexa ( X 8) (MotorMount)
M3 x 12mm Hexa ( X 4) (Direction)
M3 x 14mm Hexa ( X 3) (Direction)
M3 x 16mm Hexa ( X 1) (Direction)
M3 x 20mm Hexa ( X 60) (ALL THE REST)
M3 x 35mm Hexa ( X 2) (Direction)
M3 x 40mm Hexa ( X 24) (ARMS)

- UPDATE 09/04/2024 :
Old Part ( Servo_Support )
New Part ( Servo Support4268 )

TAGS :
# JLB CHEETAH
# Ender 3 compatible
# 3D Printed RC Car
# Ackermann Steering Compact System
# Full Metal transmission
# Brushless Motor 2850 up to 4268 (3650 recommended) (soon 4985 and 5687 $$$)
# 3S #4S # 6S
# DUAL3S => 6S / DUAL4S => 8S / DUAL6S => 12S (soon DUAL8S => 16S $$$)
# ESP Front Gyroscope
# Pinion and Gearing 0.8 Module (32 Diametral Pitch) # No cogging issues
# Metal Differential mechanism Central axis Central drive shaft Motor-Gear
# Printed Beadlock Rims 2.2p or 3.2p #No Balooning issues for 3.2p
# Strong modulable design easy replace
# Standarts pieces
# 4 Arms = 1 Arm (Lowers and Uppers)
# 4WD #2WD #4x4 #2x4
# With or Without Anti roll Bar
# 1:8 Hardware
# No Glue Only M3 Screws Washers and LockNuts
# LED Light System Front and Rear
# Drift
# GoPro Mount