Battery Holder for Protected 18650 Li-ion Batteries

ID: 17196

3D Model Details

  • Texture: No
  • Multipart model: No
  • File format: stl
  • File size: 417.46 KB
  • Upload date: 06/06/2023
  • Last update: 06/06/2023
This is a battery holder for 18650 Li-ion rechargeable batteries with a protection circuit.
Recently available 18650 Li-ion rechargeable batteries are often equipped with protection circuits, and commercially available battery holders do not fit the size of these batteries, so I made this holder.

・This is STL data for output with a 3D printer.
・The model battery size is 18.7 mm in diameter and 69 mm in length.
・There is a hole at the bottom for fixing.
・The size is approximately 24 mm (length), 78 mm (width), and 19 mm (height).
・The terminals on both ends fit terminals with a width of 8 mm (groove size is 9 mm wide). The image used the following terminals
uxcell battery spring plate AAA battery contact nickel plate 8mmx9mm
  • 18650 Li-ion battery
Report this design

More models from azospi

More from category Tools & Gadgets

Levelling layer daniel


levelling grid 3 daniel


levelling grid 2 daniel


Propellor furqan03




Funnel furqan03