Magnetic change weight plate loading and storage pin

ID: 15823

3D Model Details

  • Texture: No
  • Multipart model: Yes
  • File format: obj
  • File size: 1.5 MB
  • Upload date: 03/04/2023
  • Last update: 03/04/2023
3D Printer digital file for a Magnetic storage pin for change plates as well as a lighter duty loading pin. The Pictured is the prototype it has a 95LB pull magnet as the base. I do not recommend using it horizontally off the rack as pictured, when I started shaking the rack it just slides down, but moving it around on the cross bars its solid. Horizontal storage limit is about 8lb, vertical is probably higher than you can stack, loading pin is 120LB limit.

You will need a magnet I use the 95lb 3.20" diam magnets myself, I do have to drill the center out for the eye hook
Eye hook is a 3/8" x6" this is the largest you can go and get the weights over it. I do use threadlocker onto the nut when tightening down.

Get a physical Print here

Two versions are included one without the eye hook and the eye hook version.
Report this design

More models from darkmavrik

More from category Home, Office & Garden