3D MODEL DESCRIPTION
2 versions are available:
- Base for premium cars -> wider card
- Base for mainline -> narrower card
To avoid gluing the riser and base I made them very tight and you should use force to join them firmly. I've already printed about 20 of these stands so it's definitely doable. c:
- Premium base
- Mainline base
- Pillars (Standard for 4 cars on a short card. If you want you can scale to larger).
3D PRINTING SETTINGS
Recommended print settings:
- 40-50% infill
- Layer height of 0.28 (this is completely enough).
- Remove the bottom and top layers of the print to show the fill for a more interesting look and to save printing time. Have fun with the type of infill c:
Printing time about 3h one stand.