Print-in-place Jellyfish
ID: 11792
$1.57
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: stl
-
File size: 19.31 MB
-
Upload date: 02/19/2022
-
Last update: 02/19/2022
Description
This Jellyfish prints in place and has moving Tentacles.
It is super easy to print, doesn't need any support, hangs nicely, and has ten moving tentacles.
All you have to do is pop it off the build plate, wiggle the tentacles, thread some fishing line through the hole in the top and hang it up.
These look so cool around the house and the hidden hinges make them pretty sleek. They might confuse your friends when you tell them they were printed in one piece.
Good buildplate adhesion is very important, do not use support or a brim.
It is super easy to print, doesn't need any support, hangs nicely, and has ten moving tentacles.
All you have to do is pop it off the build plate, wiggle the tentacles, thread some fishing line through the hole in the top and hang it up.
These look so cool around the house and the hidden hinges make them pretty sleek. They might confuse your friends when you tell them they were printed in one piece.
Good buildplate adhesion is very important, do not use support or a brim.
Tags
- hanging
- print in place
- jellyfish
- tentacle
Report this design
