3D Printable Mechanical Iris-3DP5BLROD10A

ID: 11585
Free

3D Model Details

  • Texture: No
  • Multipart model: Yes
  • File format: stl
  • File size: 3.42 MB
  • Upload date: 01/02/2022
  • Last update: 01/02/2022

Description

Mechanical Iris structure designed for 3d print.
More: www.tanerxun.com
There are 5 leaves. Then you rotate the "Drive Part"or the middle plate, 
the center hole can open or close gradually. The center hole is diameter 10mm, the outer size is diameter 45mm and 
thickness is 8.2mm. To assemble the parts togther,some M2 screws are needed.
Parts are designed for 3d printing. It is best to use resin material when 3d printing. And you may need to sand some parts due to the 3d printing quality.
Parts should be printed separately and then assembled together.
Video: https://youtu.be/FjoMAfR-R98
Report this design
More models from tanerxun