Tinkeriffic BB Bearing
z
ID: 745
$1.00
3D Model Details
-
Texture: No
-
Multipart model: No
-
File format: zip
-
File size: 351.45 KB
-
Upload date: 06/07/2014
-
Last update: 06/07/2014
Description
A BB-based Tinkertoy-compatible bearing.
Like its predecessors, this Tinkertoy-compatible bearing system uses ten 4.5mm BB's to provide smoother rotation than the stock wheels included with a Tinkertoy set: (http://bit.ly/1ngex61)
The center bore is *just* a little loose on a Tinkertoy rod (not renowned for their precision diameters in the first place) so if you really need the bearing to stick fast I recommend using a little piece of painters' tape around the rod.
It's modeled in three parts for ease of assembly, but you'll need to super glue the two halves together.
Like its predecessors, this Tinkertoy-compatible bearing system uses ten 4.5mm BB's to provide smoother rotation than the stock wheels included with a Tinkertoy set: (http://bit.ly/1ngex61)
The center bore is *just* a little loose on a Tinkertoy rod (not renowned for their precision diameters in the first place) so if you really need the bearing to stick fast I recommend using a little piece of painters' tape around the rod.
It's modeled in three parts for ease of assembly, but you'll need to super glue the two halves together.
Tags
- zheng3
- 608
- spindle
- spool
- tinkeriffic
Report this design
