Tobias Beckett Blaster DG-29 from Solo A Star Wars story
ID: 9248
$25.00
3D Model Details
-
Texture: No
-
Multipart model: Yes
-
File format: stl
-
File size: 52.16 MB
-
Upload date: 08/25/2020
-
Last update: 08/25/2020
Description
Model dimensions:
- length – 326 mm
- height – 193.3 mm
- width – 37 mm
Model dimensions:
- length – 326 mm
- height – 193.3 mm
- width – 37 mm
Model consists of parts: Barrel part 1-5, Barrel screw insert 1-6, Big side pin 1,2, Body, Bottom pin 1,2, Cartridge part 1,2, Handle side insert 1-4, Indicator 1,2, Left grip insert, Left grip, Left long bar, Left middle bar, Left short bar, Logo 1,2, Right grip insert, Right grip, Right long bar, Right middle bar, Right short bar, Scope clamp 1,2, Scope disk 1,2, Scope front lens, Scope front part, Scope middle part, Scope rear lens, Scope rear part, Side hub 1,2, Side screw head insert 1-8, Side trigger pin 1,2, Side trigger, Small side pin 1,2, Trigger, Upper pin 1,2.
Details Barrel part 5 and Cartridge part 1 have slots for magnets with diameter 5 mm and thickness 1.5 mm. Details Cartridge part 2 and Body have slots too. It makes it possible to turn the barrel and remove the cartridge.
During assembling use guiding rods d=5 mm.
Use metal pins with d=3 mm in movable joint of Body and Barrel.
- length – 326 mm
- height – 193.3 mm
- width – 37 mm
Model dimensions:
- length – 326 mm
- height – 193.3 mm
- width – 37 mm
Model consists of parts: Barrel part 1-5, Barrel screw insert 1-6, Big side pin 1,2, Body, Bottom pin 1,2, Cartridge part 1,2, Handle side insert 1-4, Indicator 1,2, Left grip insert, Left grip, Left long bar, Left middle bar, Left short bar, Logo 1,2, Right grip insert, Right grip, Right long bar, Right middle bar, Right short bar, Scope clamp 1,2, Scope disk 1,2, Scope front lens, Scope front part, Scope middle part, Scope rear lens, Scope rear part, Side hub 1,2, Side screw head insert 1-8, Side trigger pin 1,2, Side trigger, Small side pin 1,2, Trigger, Upper pin 1,2.
Details Barrel part 5 and Cartridge part 1 have slots for magnets with diameter 5 mm and thickness 1.5 mm. Details Cartridge part 2 and Body have slots too. It makes it possible to turn the barrel and remove the cartridge.
During assembling use guiding rods d=5 mm.
Use metal pins with d=3 mm in movable joint of Body and Barrel.
Tags
Report this design
