**For Personal Use Only**
Beautiful and strong flower vase to hang on the wall, hook included. You can use screws, nails or glue.
Easy to print, needs supports only under the earcup (video tutorial in link). I created a file with the supports already placed with Meshmixer, but honestly have not tested printing. I prefer to use Prusa slicer, it doesn't miss a beat.
Make sure your printer is properly calibrated with good retraction and good bed adhesion, otherwise I recommend brim and / or raft.
If you have any doubts or problems on any printing steps, please write me!
I would also love to see the final piece when you are done.
All my designs are protected by Copyright. The Digital files are never to be re-sold, shared, or given away! Thanks.
To legally sell **physical print** of my design and If you want to get the latest update on my designs before anyone else and exclusive designs and tutorial for your support, become a 3DGiArt Patreon:
3D printing settings
Nozzle diameter: 0,4 mm.
Infill: 20 %.
Perimeters/Wall: 2 or 3
Supports: customized supports ONLY under the earcup (watch Video in link)
Brim: recommended if you don't have good adhesion
TIPS (not necessary):
I printed it with Ender 3 S1, with excellent results using prusa slicer and Paint-on supports.
Infill: 20% Support Cubic (I love this type of filling by prusa, it saves time and material, and the printing is strong). Enforce support for the first layer 100% (better adhesion)
Shells/Solid Layers: Top 5 – Bottom 4