Description
The mold is intended for the tire manufacture from silicone or similar flexible material in Scale 1:10. It consists of 2 parts: top and bottom part. Each part can be 3D printed without supports.
Mold dimensions:
- diameter - 200 mm
- height - 70 mm
Tire dimensions:
- outer diameter - 160 mm
- overall width - 60 mm
- inner diameter - 72 mm
If you want a different wheel size, simply scale the mold.
The bottom mold part has 5 special bosses and Top mold part has 5 special holes to guide mold parts in the closed state. Also, there are 4 slots for better opening with a screwdriver or similar instrument.
In the Top mold part are 4 small holes for material injection.
Both mold parts have 4 holes with diameter 6 mm for bolting it in closed state.
Report this design